GTKClean engineers solvent recovery systems for manufacturers that need to distill contaminated solvent and condense reusable liquid for return to the cleaning process.
Solvent recovery systems are designed to distill contaminated solvent and condense reusable liquid for return to the cleaning process. Typical applications include solvent cleaning plants, precision degreasing and facilities seeking lower solvent consumption.
The process is configured from solvent boiling range, contaminant type, batch volume, recovery purity, heating method and residue discharge. Available solutions can integrate vacuum or atmospheric distillation, condensation, clean-solvent storage, residue handling and safety controls.
GTKClean uses application data and, where appropriate, representative sample parts to define the process before the final equipment configuration is approved.
Confirm material compatibility, contaminant load, solvent choice, basket size, throughput, cleanliness target, recovery rate and safety requirements before the equipment or process is finalized.
Use representative parts to define how the solvent recovery system will achieve the required result.
Develop the process layout, fluid circuit, controls, safety functions and operator access around the approved requirement.
Fabricate, assemble and inspect the stainless-steel structure, process modules, piping, wiring and handling system.
Run functional and process checks, document the approved configuration, then support installation, training and commissioning.
The process is defined around solvent boiling range, contaminant type, batch volume, recovery purity, heating method and residue discharge, with sample testing available when results need verification.
The system can combine vacuum or atmospheric distillation, condensation, clean-solvent storage, residue handling and safety controls according to the actual production requirement.
Mechanical, fluid, electrical and control functions are inspected against the approved project documents.
Documentation, commissioning guidance, training, spares and process review support stable long-term operation.
Solvent Recovery System are a strong fit for solvent cleaning plants, precision degreasing and facilities seeking lower solvent consumption.
The recommended layout depends on solvent boiling range, contaminant type, batch volume, recovery purity, heating method and residue discharge. GTKClean compares process capability, throughput and maintainability before fixing the machine concept.
The equipment is engineered to distill contaminated solvent and condense reusable liquid for return to the cleaning process.
A complete configuration can include vacuum or atmospheric distillation, condensation, clean-solvent storage, residue handling and safety controls, with operating limits documented for the approved application.
Loading height, baskets, fixtures, recipes, traceability, safety circuits and communication interfaces can be adapted to the host production line.
Integration scope is agreed from drawings, signals, utilities, takt time and the responsibilities of each project party.
Inspection follows the approved drawings and technical proposal. Typical checks cover fabrication, installed components, piping, wiring, controls, alarms, safety functions and programmed operation.
For this category, acceptance planning should reflect solvent boiling range, contaminant type, batch volume, recovery purity, heating method and residue discharge. When representative parts and a measurable standard are supplied, process trials can be documented before shipment.
The sealed process chamber is sized from the required process capacity, operating conditions and interfaces for this product category.
The ultrasonic or spray module is sized from the required process capacity, operating conditions and interfaces for this product category.
The vacuum system is sized from the required process capacity, operating conditions and interfaces for this product category.
The solvent recovery is sized from the required process capacity, operating conditions and interfaces for this product category.
The safety controls is sized from the required process capacity, operating conditions and interfaces for this product category.
Send part data, contamination, acceptance criteria and throughput so GTKClean can evaluate the appropriate process and equipment configuration.
Get a Project-Specific Quote
"Every Solvent Recovery System project starts with the part, contamination and acceptance target. The equipment configuration follows the process requirement."
Solvent recovery systems are selected when manufacturers need to distill contaminated solvent and condense reusable liquid for return to the cleaning process. The right solution is defined by the part, contamination and acceptance method—not by tank size or rated power alone.
GTKClean reviews sample parts, production data and factory constraints before proposing a process. This reduces the risk of buying equipment that looks suitable on paper but cannot meet the required cleanliness, throughput or operating cost.
The core process is designed to distill contaminated solvent and condense reusable liquid for return to the cleaning process. Depending on the application, a complete cycle may combine vacuum or atmospheric distillation, condensation, clean-solvent storage, residue handling and safety controls. Each stage has a defined operating window rather than relying on one fixed standard recipe.
Typical uses include solvent cleaning plants, precision degreasing and facilities seeking lower solvent consumption. Suitability must still be confirmed against material compatibility, hidden geometry, soil loading and the way cleanliness will be measured after processing.
Important inputs include solvent boiling range, contaminant type, batch volume, recovery purity, heating method and residue discharge. These values determine capacity, process sequence, utilities, controls and the level of automation required.
When the cleanliness target is critical, representative sample trials should reproduce the real contamination and inspection method. A visually clean part is not always sufficient for coating, assembly, optical or fluid-system service.
A project can incorporate vacuum or atmospheric distillation, condensation, clean-solvent storage, residue handling and safety controls. GTKClean selects options only when they contribute to the required result, cycle time, bath stability, operator safety or integration with the production line.
Before delivery, checks can cover fabrication, piping, wiring, controls, alarms, safety interlocks, temperature, circulation and programmed sequences. When sample parts and an agreed test method are available, process results can be included in the factory acceptance plan.
Send this information through the GTKClean project enquiry form for an application-specific process and equipment proposal.
